The lean solution
save space • save time • save costs
2-Channel Isolation Amplifier DN 26000
Outstanding performance
- Only 3 mm per channel
- Highest precision and signal quality
- Calibrated range selection
0/4 ... 20 mA, 0 ...10 V, 0 ... 5 V - Short response time
- Wide temperature range
No compromises
- True 5-port isolation
- Test voltage 3 kV
- Free configurable by DIP switch
- Easy installation via In-Rail-Bus
The first active 2-channel isolation amplifier with a channel width of only 3 mm is suitable for a variety of automation tasks, especially for applications with a high number of measuring points and where space is limited.
The input and output ranges can be selected individually for each channel via DIP switches; subsequent readjustment is not necessary thanks to the calibrated measuring range selection. A signal clipping and the cut-off frequency can also be adapted to the measuring task.
Power is supplied via the In-Rail-Bus, which ensures pre-wiring on a standard DIN rail. This significantly reduces the wiring effort.
Applications
- Large-scale installations
- System extensions
- Limited space conditions
- Time-critical installations
Technical Data
| Function | 2 independently configurable isolation amplifier channels |
| Analog inputs | 0/4 ... 20 mA, 0 ... 10 V, 0 ... 5 V |
| Analog outputs | 0/4 ... 20 mA, 0 ... 10 V, 0 ... 5 V |
| Load | ≤ 10 V (500 Ω bei 20 mA), ≤ 5 mA (2 kΩ bei 10 V) |
| Measuring error | < 0.1 % |
| Galvanic isolation | all ports fully isolated |
| Test voltage | 3 kV AC, 50 Hz, 1 min |
| Configuration | calibrated selectable per DIP switch |
| Operating temperature | –25 °C ... +70 °C |
| Supply voltage | 16.8 ... 31.2 V DC via In-Rail-Bus |
| Size (H x D x W) | 96 x 107 x 6.2 mm |
Block diagram
Customer Request at DRAGO
Our performance – your advantage
- Comprehensive product range
- Customer-specific special solutions
- Individual consulting and support
- Most modern production technology
- Certification according to ISO 9001
- 5 years warranty
- Made in Germany
