You are here:

4 Channel DI/DO Module DMB 96700

4 independent controllable digital I/O channels, Modbus RTU

  • 4 channels
    independent controllable digital I/Os
  • Each channel programmable
    as input or output
  • Programmable
    switch-ON and switch-OFF behavior
  • Extensive programmable operating functions
    Frequency or counter input, frequency, puls or PWM outputs
  • Protective 5-way separation
    up to 300 V AC/DC, test voltage 3 kV
  • Status indication
    for each channel
  • In-Rail-Bus Connector
    for Modbus and power supply
  • Extremely slim
    only 6.2 mm installation width
  • Made in Germany
    5 Years Warranty

The Modbus 4-channel DI/DO module has four independently configurable inputs/outputs. The inputs can be used either as a binary, frequency or counter input with three selectable input levels. The open collector outputs are usable as binary, frequency, pulse or PWM outputs. Various time functions can be used to influence the switching behaviour. All parameters can be set via the Modbus RTU interface. A subset of the settings is available via DIP switches.

The 5-way isolation ensures reliable decoupling of the inputs/outputs from the processing circuit and the power supply. Power supply and Modbus RTU must be connected via the In-Rail-Bus connection (see accessories).

Product line

Product line DMB 96700
Device Type Order No.
Modbus 4 Channel DI/DO Module,
In-Rail-Bus for power supply and Modbus connection
DMB 96700 B

Technical Data

Input

Input level 5 V, 12 V, 24 V
Input resistance 4 kOhm
Input voltage < 32 V DC
Min. pulse width 0.5 ms
Functions Binary
Frequency: 0.1 Hz to 1 kHz
Counter: 16 / 32 bit

Output

Output type Open collector
Max. voltage / current 32 V DC, 100 mA
Residual voltage < 1.5 V DC
Min. pulse width 0.3 ms
Functions Binary
Frequency: 0.1 Hz to 1 kHz
Pulse: 1 to 60000 /min
PWM: 500 Hz, 10 to 90 %

Modbus

Protocol Modbus RTU (RS485)
Module addressing 1 to 247
Response delay 1 to 1000 ms
Baudrate 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Configuration Parity: Even, Odd, None with 2 stop bits, None with 1 stop bit
Connectivity Up to 247 DRAGO Modbus devices without additional repeater (1/8 Load)
Indication Yellow LED on front panel

General Data

Indication Yellow LED for each channel on front panel
Test voltage 3 kV AC, 50 Hz, 1 min., All channels against each other and against
Modbus/power supply
Protection against dangerous
body currents1)
Protective Separation by reinforced insulation acc. to DIN EN 61010-1
up to 300 V AC/DC for overvoltage category II and contamination
class 2 between input and Modbus/power supply
Ambient temperature Operation: -25 °C to +70 °C (-13 to +158 °F)
Transport and storage: -40 °C to +85 °C (-40 to +185 °F)
Power supply 24 V DC, voltage range 16.8 V to 31.2 V DC, approx. 0.5 W
EMC2) EN 61326-1
Construction 6.2 mm (0.244") housing, protection type: IP 20,
mounting on 35 mm DIN rail acc. to EN 60715
Connection
(captive plus-minus clamp screws)
Solid: 0.5 mm² - 4 mm² / AWG 20-12
Fine-stranded: 0.5 mm² - 2.5 mm² / AWG 20-14
Stripped length: 6-8 mm / 0.28 in
Screw terminal torque 0.8 Nm / 7 lbf in
Weight Approx. 70 g
  1. As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipment. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
  2. Minor deviations possible during interference

Block diagram

Dimensions

Terminal assignments

  • 1 + Channel 1
  • 2 − Channel 1
  • 3 + Channel 2
  • 4 − Channel 2
  • 5 + Channel 3
  • 6 − Channel 3
  • 7 + Channel 4
  • 8 − Channel 4
  • A Modbus A
  • B Modbus B
  • C − Power supply 24 V DC
  • D + Power supply 24 V DC

Subject to change!

Back to the product list

Product request

Please calculate 9 plus 2.